181
Easytronic
If the interruption of power supply was not
caused by a discharged battery, consult
a workshop. We recommend your Vauxhall
Authorised Repairer. If the vehicle must be
moved out of the flow of traffic, disengage
the clutch on vehicles with 5-speed
Easytronic. Disengaging the clutch is not
possible on vehicles with 6-speed
Easytronic
3
.
The vehicle must be moved.
Raise the vehicle by the front axle when
towing.
To disengage the clutch
(
only on vehicles with 5-speed Easytronic):
1.
Apply handbrake and switch off ignition.
2.
Open bonnet.
3.
Clean Easytronic around the cap (see
illustration) so that no dirt can get into
the opening when the cap is removed.
4.
Rotate cap to slacken and remove by
lifting upwards – see illustration.
5.
Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools
3
–
see page 251) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance,
since this can damage the Easytronic.
6.
Fit cleaned cap again. The cap must be
in full contact with the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be moved a short distance.
Consult a workshop immediately.
We recommend your Vauxhall Authorised
Repairer.