220
Drive control systems
Picture no: 17018t.tif
Control indicator
w
If control indicator
w
illuminates yellow
while driving, there is a fault in the tyre
pressure monitoring system. Fitting a wheel
without pressure sensor (e.g. spare wheel)
will also generate a fault in the system.
Have the cause of the fault remedied. We
recommend that you consult your Vauxhall
Authorised Repairer. The system’s
integrated self-diagnostics allows faults to
be quickly remedied.
Picture no: 17019t.tif
System initialisation
The system must be initialised after
a wheel / tyre change:
with the ignition switched on, press
button
DDS
approx. 4 seconds. Control
indicator
w
flashes 3 times. The system
is operational after driving a certain
distance.
Only initialise the system if all tyres have
the prescribed pressure (check when tyres
are cold).
General information
The spare wheel / temporary spare is not
equipped with a pressure sensor. The tyre
pressure monitoring system is not
operational if the spare wheel / temporary
spare is in use. Control indicator
w
illuminates yellow
–.–
appears in the
display of tyre pressures. Tyre pressure is
monitored by the Deflation Detection
System – see page 217.
If a complete set of wheels without tyre
pressure control system sensors is mounted
(
e.g. four winter tyres), no error message
will be displayed. The tyre pressure
monitoring system is not operational.
The tyre pressure of a set of wheels
without sensors is monitored by the
Deflation Detection System (DDS) –
see page 217.