20
In brief
Picture no: 17001t.tif
Manual transmission:
Reverse: with the vehicle stationary, wait
3
seconds after declutching and then pull
up the button on the selector lever and
engage the gear.
If the gear does not engage, set the lever
in neutral, release the clutch pedal and
depress again; then repeat gear selection.
Picture no: 17002t.tif
Easytronic
3
:
N = Neutral (idle)
o
= Drive position
+ = Higher gear
-
= Lower gear
A
= Change between
automatic and
manual mode
R = Reverse
(
with selector lever lock)
The selector lever must always be moved
in the appropriate direction as far as it will
go. Upon release, it automatically returns
to the centre position. Pay heed to the
gear / mode indicator in the transmission
display.
The foot brake must be depressed when
starting.
6
Easytronic – see page 174.
Picture no: 17003t.tif
Automatic transmission
3
:
P = Park
R = Reverse
N = Neutral (idle)
D = Automatic gear selection
3
= 1st to 3rd gear
2
= 1st and 2nd gear
1
= 1st gear
Starting only possible in
P
or
N
.
To move
from
P
,
switch on ignition, depress foot
brake and press button on selector lever.
Press button on selector lever to engage
P
or
R
.
P:
Only with vehicle stationary, first
apply handbrake
R:
Only with vehicle stationary
6
Automatic transmission – see page 182.