254
Self-help
Picture no: 17246t.tif
3.
The location of each jacking point
3
is
indicated by a mark on the bottom edge
of the vehicle.
Picture no: 17247t.tif
4.
Before positioning the jack
3
,
set it to the
necessary height by rotating the eye by
hand. Position the jack
3
at the front or
rear so that the jack claw spans the
vertical base and grips in the recess in
the vertical base. Make sure it is properly
positioned.
The jack base must be on the ground
directly below the jacking point in a
manner that prevents it from slipping.
Picture no: 17248t.tif
Attach crank to eye of threaded rod and
turn crank to raise vehicle.
If this is not the case, carefully lower the
vehicle immediately and reposition the
jack.
5.
Unscrew wheel bolts and put somewhere
where the threads will not be soiled.
If the wheel bolts have retaining
washers
3
,
they must not be removed.