257
Self-help
Picture no: 17252t.tif
4.
Screw the compressor air hose to the
connection on the sealant bottle.
5.
Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the tyre in such
a way that the sealant bottle is upright.
6.
Remove the valve cap from the defective
tyre.
Picture no: 17253t.tif
7.
Screw the filler hose to the tyre valve.
8.
The switch on the compressor must be
set to
§
.
9.
Connect the compressor plug to the
accessory socket or cigarette lighter
socket. Accessory socket – see page 106.
Picture no: 17254t.tif
10.
Set the rocker switch on the
compressor to
I
.
The tyre is filled with
sealant.
11.
While the sealant bottle drains (approx.
30
seconds) the pressure indicator on
the compressor briefly points to 6 bar.
Pressure then sinks again.
12.
All of the sealant is pumped into the
tyre. Afterwards, the tyre is filled with
air.
13.
The prescribed tyre pressure
(
see page 326) should be reached
within 10 minutes. Switch off the
compressor when the correct pressure is
obtained.