285
Self-help
5.
Remove bulb from socket.
6.
Insert new bulb, without touching the
glass.
7.
Insert bulb holder in bulb housing by
first inserting the lug in the front of
the plug. Fold together bulb holder,
ensuring that it engages properly.
Insert sockets and engage by turning.
Picture no: 18018t.tif
8.
Fit seal on bulb holder as illustrated.
Ensure that the seal is flat in the area
of the screws.
9.
Engage plug. Insert light housing in
body, ensuring proper positioning of
the ball pins in the recesses. Tighten
the retaining nuts.
10.
Carry out the following steps to ensure
proper function of the tail lights:
–
switch on ignition,
–
operate brake,
–
switch on parking lights.
Picture no: 17297t.tif
Number plate light
1.
Insert screwdriver vertically in bulb insert
as illustrated above. Press to the side
and release spring.