37
Instruments
If it illuminates:
Fault in Open&Start system.
Lock or unlock vehicle using remote control
or emergency key if necessary –
see page 80, or attempt to use the spare
key.
Emergency operation – see page 81.
If
0
illuminates, this can also mean that
the steering column is still locked: move
steering wheel to and fro a little and press
Start / Stop button again.
If
0
illuminates whilst driving a system
error has occurred that may eventually
lead to a complete failure.
If
0
illuminates or flashes: the Start / Stop
button must be held depressed slightly
longer to switch off the ignition. It is
possible that the vehicle will not start
during the next start attempt.
If
0
continues to flash or remains
illuminated, consult a workshop
immediately. We recommend your
Vauxhall Authorised Repairer.
I
Engine oil pressure
The control indicator illuminates when the
ignition is switched on and goes out shortly
after the engine starts.
If it illuminates when the engine is running:
Engine lubrication may be interrupted. This
may result in damage to the engine and/or
locking of the drive wheels:
1.
Depress clutch.
2.
Shift manual transmission or
Easytronic
3
into neutral; for automatic
transmission
3
,
set selector lever to
N
.
3.
Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
4.
Switch off ignition.
Check oil level before consulting a
workshop. We recommend your Vauxhall
Authorised Repairer.
9
Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has come
to a standstill, otherwise the steering
column lock could engage unexpectedly.