39
Instruments
p
Alternator
The control indicator illuminates when the
ignition is switched on and goes out shortly
after the engine starts.
If it illuminates when the engine is running:
Stop, switch engine off. Battery is not
charged. Engine cooling may not be
operating. With a diesel engine the brake
servo unit may stop operating. Check the
drive belt before contacting a workshop.
We recommend your Vauxhall Authorised
Repairer.
W
Coolant temperature
If it illuminates when the engine is running:
Stop, switch engine off. Coolant
temperature too high: danger of
engine damage. Check coolant level
immediately – see page 294.
A
Engine electronics,
Transmission electronics
3
,
Electronic immobiliser,
Diesel fuel filter
3
,
Fault
The control indicator illuminates for a few
seconds when the ignition is switched on.
If it illuminates when the engine is running:
Fault in engine electronics or transmission
electronics. Electronics switch to
emergency running programme, fuel
consumption may increase and driveability
of the vehicle may be impaired –
see page 206. Consult a workshop
immediately. We recommend your
Vauxhall Authorised Repairer.
Illuminated together with
InSP4
in the
service display: have the diesel fuel filter
drained of water – see page 294.
If it flashes when the ignition is on:
Fault in the electronic immobiliser system;
the engine cannot be started –
see page 67.
IDS+
Interactive Driving System
3
,
Continuous Damping Control (CDC)
3
,
SPORT mode
3
IDS+ – see page 208,
CDC – see page 210,
SPORT mode – see page 210.
S
Engine oil level
3
The engine oil level is checked
1)
automatically.
Illuminated: engine oil level too low. Check
engine oil level and top up if necessary –
see page 292.
8
Exterior lights
The control indicator is illuminated when
the exterior lights are on – see page 134.
r
Parking distance sensors
3
,
see page 214.
1)
Not on Z 14 XEP or Z 20 LEH engine.
Sales designation – see page 308.